With a broad range of heating capacities per foot length, 125 watts (435 BTU per hour) to 750 watts (2,560 BTU per hour), these units can be run from wall-to-wall or they can be mounted as discrete units in lengths of 28 inches to 10 feet. Locate them at sill height (or lower) or run them from mullion-to-mullion.

125 to 250 watts per foot units can be positioned within 1-3/4" of the floor; 375 to 750 watts per foot units can be positioned to within 3" of the floor. The 5-1/2" high sill-height convectors are only 3" in depth (front to back); the seven and fourteen inch high models are only 5" in depth.

5-1/2 and 7 inch high models are available with top outlet only; 14 inch models are available with top or front outlet.

Available in a spectrum of muted architectural colors in baked enamel finishes which are compatible with all interior decors.

Front cover is fabricated from 16-gauge steel (14 gauge optional). For services, all internal parts are accessible by removing cover. Top of front cover engages with grille supports; bottom of cover locks into place with concealed Phillips head screws.

Thermal limit switch with linear type (full length) sensing bulb provides constant protection against overheating from any cause. The switch will automatically reset when normal operating temperatures are restored.

 For more information see Submittal.